SKU: 500304
100-inch Manual Sheet Metal Brake - 12 Gauge Bending Capacity, Adjustable Fingers, 8 Ft. Heavy-Duty Steel Construction, Precision Bending for Box and Pan PB10012
$9,79900
$12,000.00
Save $2,201
Save $2,201
Starting at $527.19/mo or as low as 0% APR.
FREE SHIPPING. Liftgate service available for an additional fee at checkout.
Delivery in 10 - 15 Business Days
Delivery in 10 - 15 Business Days
Payment:
| Max Bending Length | 100 in (8 ft) |
| Max Bending Thickness | 12 Gauge Mild Steel (2.5 mm) |
| Bending Angle | 0° to 135° |
| Max Box Depth | 6 in (152 mm) |
| Shut Height | 4 in (102 mm) |
| Max Lift of Beam | 1 in (25 mm) |
| Beam Adjustment | Manual |
| Finger Configuration | 2.5" x 1, 3" x 1, 3.5" x 1, 4" x 1, 5" x 3, 6" x 4, 12" x 4 |
| Material | High-strength Steel Frame |
| Max Capacity | 12 Gauge Mild Steel (0.105 in, 2.5 mm) |
| Beam Type | Box Beam with Reinforced Ribs |
| Packaging Dimensions | 110" x 32" x 45" (2800 mm x 820 mm x 1143 mm) |
| Shipping Weight | Approx. 2,700 lbs |
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
No reviews yet. Be the first to leave one!
Write a Review
You May Also Like
53.5″ Wide CB-V2 Vertical Laminar Flow Clean Bench with HEPA Filtration & UV Sterilization | ISO Class 5
SKU: 321004
$2,24900
150 Ton H-Frame Electric Hydraulic Shop Press with Double-Acting Cylinder & Chain-Driven Table Lift, 110V Motor, Fully Welded Steel Frame, Safety Guard, HSP150E
SKU: 200067
$10,99900
$15,999.00
Save $5,000
Save $5,000
100 Ton H-Frame Air/Hydraulic Shop Press with Hand Winch, Fully Welded Steel Frame, Safety Guard, Foot Pedal Control, HSP100
SKU: 200065
$4,89900
$5,699.00
Save $800
Save $800
48 in Rotary Tiller, 3 Point Hitch Cat.1 & 2, Gear Drive, PTO Shaft Included with Slip Clutch, 25-50 HP, MRT48
SKU: 201110
$2,39900
$3,199.00
Save $800
Save $800
More Products
SKU: 464014
Pressure Washer 3/8" Double Female Quick Connector Max Pressure 5000 PSI
SKU: 200012
6 Ton Heavy Duty Jack Stand, 1 Pair, Blue
SKU: 412037
Leveling Foot Set of 6 for Portable Sawmill, SM-22, SM-26 and SM-32 (SKU: 150169; 150166; 150166D6; 150167; 150167K4; 150167D6; 150167K6; 150167H6)
SKU: 412180
Tapered Bushing Pulley for B200 Honda Engine (SKU: 110811)
SKU: 480017
(Maintenance Part) Oil-air Separator Filter For 30HP Air Compressor
SKU: 461059
( 1 Pack / 1 Pcs ) Boom Cylinder Inlet Hose (for SKU: 150162, 201162)
SKU: 485323
Slotted Clamp Bar 47.24 Inch Long for SKU: 500001 | Model: MSMB1250E
SKU: 412200
Motor for Log Splitter Processor with Conveyor HLS20 (SKU: 150244; 150245)